03-11 MERCEDES W211 W219 "KEYLESS GO" FLOOR GEAR SELECTOR SHIFTER A2112676324

🟩 2003–2011 Mercedes-Benz W211 E-Class / W219 CLK-Class "Keyless Go" Floor Shifter — OEM

Part #: 2112676324 (A 211 267 63 24)

Condition: Tested • Cleaned & Sanitized • 30 Day Warranty • Free Returns

Note: Specific to vehicles equipped with Option Code 889 (Keyless Go). This shifter features the internal wiring and sensors required for the push-button start located on the shift knob.

🔧 Item Description

• Genuine Mercedes-Benz OEM Electronic Floor Shifter Assembly.

• Fits W211 E-Class (2003–2009) and W219 CLS-Class (2006–2011).

• Designed for vehicles with the Keyless Go system where the engine is started via the button on top of the shifter.

• Resolves issues where the vehicle fails to recognize the shift knob "Start" button or gets stuck in "Park."

✅ Functionality & Testing

• ✔️ Keyless Go Circuit: Internal sensor array tested to ensure communication with the Keyless Go control module.

• ✔️ Mechanical Travel: Tested for smooth, defined gates through P-R-N-D and the side-to-side (+/-) Touch Shift.

• ✔️ Park Lock Solenoid: Verified to click and release instantly when the brake pedal is depressed.

• ✔️ Electrical: All pins on the main harness and the secondary Keyless Go connector are straight and clean.

🧼 Condition & Inspection

• Professionally cleaned and sanitized.

• Internal: Inspected for "soda/coffee spill" damage; the electronic board and mechanical slides are clean and dry.

• Chassis: High-strength plastic housing is free of cracks; all four mounting points are intact.

• Pivot Point: Bushings have been inspected to ensure there is no excessive "slop" or play in the lever.

🚗 Vehicle Compatibility Mercedes-Benz E-Class & CLS-Class (With Keyless Go)

• 2003–2009 E320, E350, E500, E550, E55/E63 AMG (W211)

• 2006–2011 CLS500, CLS550, CLS55/CLS63 AMG (W219)

• Crucial: Please match part number 211 267 63 24. If your car does not have a start button on the shifter, this part is not compatible.

⚙️ Features & Benefits

• Genuine Mercedes Part: Guaranteed to interface correctly with the vehicle's security and drive authorization system.

• Keyless Integration: Features the dedicated pass-through wiring for the shift knob button harness.

• Direct Fit: Uses factory mounting hardware and electrical connectors.

🔩 Installation Notes

• Requires removal of the center console.

• You must carefully transfer your existing Keyless Go shift knob to this unit, ensuring the delicate wire ribbon is plugged in securely.

• No coding is typically required as long as the part numbers match your original unit.

🛡️ Warranty & Returns

• ✔️ 30 Day Warranty — Guaranteed mechanical and electronic functionality.

• ✔️ Free Returns — Shop with total confidence.

• ✔️ Tested & Cleaned